Red-iron steel · MO · AR · OK · TN · Erected by our own crew Have a site? Get a quote →

Home  /  What we build  /  Color chart

Steel Color Chart · v1.0

Your building. Your colors.

Twenty-six standard panel colors for the roof, walls, and trim — the same PBR-grade Galvalume-backed sheet steel that every red-iron kit ships with. If you want a color that isn't on this page, ask us. Kynar 500 upgrades and custom pulls are available on any job over 3,000 square feet.

26 Standard panel colors across roof and wall
40 yr Chip, crack, flake, and fade warranty on paint film
Galvalume AZ-50 or AZ-55 substrate on every panel we install
Kynar 500 Available as upgrade for coastal, high-UV, or premium builds

How to read this page.

Every color below is available for roof, walls, wainscot, or trim. Most builds use two or three colors total — a roof, a main wall color, and one accent for trim, gables, and overhead doors. The swatches on this page are close approximations, but paint on a computer screen will never match a physical sample. We ship you free 4-inch physical chips before you sign off on any color combination, and we recommend holding them up to your site in daylight before locking anything in.

Warranty note. All standard PBR-grade colors carry a manufacturer's 40-year film integrity warranty (chip, crack, flake) and a 30-year fade warranty (Delta E under 5). Kynar 500 upgrades push both warranties to 40+ years and are recommended for coastal sites, dark colors in high-UV climates, and premium residential work.

Popular roof colors

The roof is the biggest color on any barndominium or shop — and the one that ages the hardest under sun and rain. These are the seven roof colors that account for about 80% of the roofs we install.

CharcoalDeep grey · low glare
BlackMatte finish · high contrast
BronzeBrown-black · warm undertone
Burnished SlateWarm dark grey-brown
Copper MetallicRustic weathered look
Rustic RedBarn-red classic
Galvalume PlusBare metal · agricultural look

Wall colors — warm neutrals

Warm neutrals are the safest, most timeless wall pick. They age well, hide dust, and pair with almost any roof and trim.

Polar WhiteWarm off-white
AlmondCream · slight yellow
Light StoneSandy beige
Saddle TanWarm mid-brown
ClayTerracotta undertone
Coffee BrownRich dark brown

Wall colors — cool neutrals & greys

Cool neutrals read modern. They pair especially well with black or charcoal roofs and stone accents.

SaharaCool off-white
Ash GreyLight cool grey
Slate GreyMid grey · slight green
Charcoal GreyDeep steel grey
IronstoneNear-black cool grey

Wall colors — earth & farmhouse

Traditional barndominium palettes. Reds, greens, and deep browns that read as timeless farmhouse rather than trend.

Barn RedClassic red
Crimson RedDeep burgundy red
Forest GreenDeep pine green
Hunter GreenMid green · warm
Patriot BlueDeep navy

Trim, gable, and door accents

Trim is the smallest color decision but the one that ties everything together. Most builds pick one of the following four accent groups. The rule of thumb: trim should either match the roof (for a modern monochrome look) or contrast the walls (for a farmhouse look).

BlackBest on white or light walls
Polar WhiteBest on dark walls
BronzeWarm accent · pairs everything
Barn RedTraditional door and trim pop

Popular combinations

Every job is different, but these are the five combinations that show up most often on the projects we deliver across Missouri, Arkansas, Oklahoma, and Tennessee. If you're stuck, start here.

Combo Roof Walls Trim Reads as
Modern Farmhouse Black Polar White Black Clean, timeless, high resale
Ozark Traditional Bronze Light Stone Bronze Warm, blends with hardwoods
Ranch Red Charcoal Barn Red Polar White Classic red barn
Lake Modern Charcoal Slate Grey Black Monochrome, contemporary
Hill Country Burnished Slate Saddle Tan Bronze Warm, ranch, cedar-friendly

What we ship you before you decide

Every Ozark Closers contract includes a free color sample pack before you sign off on the final specification. Here's what you get:

Custom colors and Kynar 500 upgrades. If you want a color that isn't on this page — a specific brand match, a metallic finish, or a Kynar 500 upgrade for extra fade resistance — we can pull custom colors on any job over 3,000 square feet. Custom pulls typically add 3–6 weeks to the kit lead time and $0.35–$0.85 per square foot to the panel cost. We'll quote it before we order.

Ready to spec your building?

Send us your plan (or your rough vision) and we'll send back a fixed-price quote plus a free color sample pack in the colors you're considering. No hard sell, no drip email campaign.

Get a quote →